Introduction

Use this guide to replace your extractor head if it is damaged.

Make sure that the device is unplugged and has not been used recently because the extractor head and bowl can be very hot.
  • Make sure that the device is unplugged and has not been used recently because the extractor head and bowl can be very hot.

  • Place the device on a steady table.

  • Lift and remove the rim.

Add Comment

Twist the bowl clockwise until it is free of the groove and lift to remove. Twist the bowl clockwise until it is free of the groove and lift to remove. Twist the bowl clockwise until it is free of the groove and lift to remove.
  • Twist the bowl clockwise until it is free of the groove and lift to remove.

Add Comment

Firmly grip the extractor head and slowly lift vertically to remove from the device. Firmly grip the extractor head and slowly lift vertically to remove from the device.
  • Firmly grip the extractor head and slowly lift vertically to remove from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Carlton

Member since: 01/13/2015

621 Reputation

5 Guides authored

Team

USF Tampa, Team 3-5, Hickman Winter 2015 Member of USF Tampa, Team 3-5, Hickman Winter 2015

USFT-HICKMAN-W15S3G5

5 Members

8 Guides authored

4 Comments

Where can I order a new owners Manuel.? My kids or the dog ate the one it came with. I didn't save the box either.

melissaroberts67 - Reply

Where do I order a new extractor head?

melissaroberts67 - Reply

Where do I order a new extractor head?

lianahanson - Reply

Where do I get replacement extractor head?

lianahanson - Reply

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 21

Past 30 Days: 82

All Time: 2,056