Parts

No parts required.

  1. Flip the phone over to view the back.
    • Flip the phone over to view the back.

    • Remove the power and phone cords.

    Add Comment

  2. Remove the seven 8mm Phillips #2 screws.
    • Remove the seven 8mm Phillips #2 screws.

    Add Comment

    • Lift up the back cover slowly because there are still wires attached to the circuit board.

    • Lifting the back cover should not require a lot of force; simply lift with your fingertips.

    Add Comment

    • Disconnect the rubber piece by pulling it out of the slot, freeing the back cover completely.

    Add Comment

    • Remove the six 8mm Phillips #2 screws.

    • Pull the speaker phone cover straight up.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Elizabeth

Member since: 01/21/2012

160 Reputation

3 Guides authored

Team

Cal Poly, Team 10-35, Amido Winter 2012 Member of Cal Poly, Team 10-35, Amido Winter 2012

CPSU-AMIDO-W12S10G35

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 976