Use the T5 Torx screwdriver to remove the two 3.8 mm screws located in the back right corner of the device. Use the T5 Torx screwdriver to remove the two 3.8 mm screws located in the back right corner of the device.
  • Use the T5 Torx screwdriver to remove the two 3.8 mm screws located in the back right corner of the device.

Add Comment

Using a plastic opening tool, pry off the back cover by going around the device until the panel is completely detached. Using a plastic opening tool, pry off the back cover by going around the device until the panel is completely detached.
  • Using a plastic opening tool, pry off the back cover by going around the device until the panel is completely detached.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Maria Delpilar

Member since: 01/20/2015

193 Reputation

1 Guide authored

Team

USF Tampa, Team 11-5, Blackwell Winter 2015 Member of USF Tampa, Team 11-5, Blackwell Winter 2015

USFT-BLACKWELL-W15S11G5

3 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 9

All Time: 418