Fix Your Stuff Community Store

Noma Pedestal Fan Blade Replacement

Introduction

A malfunctioning fan can be a frustrating experience, especially during those hot summer days when you rely on your fan for cool comfort. However, fear not – in this step-by-step guide, I will walk you through the process of replacing a faulty fan blade, allowing you to revive your NOMA pedestal fan and restore it to optimal performance. Before we begin, it's essential to ensure your safety. Always disconnect the fan from the power source before attempting any repairs, and take the necessary precautions to avoid any electrical hazards. Additionally, make sure you have the replacement parts required for the task, ensuring a smooth and efficient repair process.

What you need

  1. Noma Pedestal Fan Blade Replacement, Fan Blade: step 1, image 1 of 2 Noma Pedestal Fan Blade Replacement, Fan Blade: step 1, image 2 of 2

    • Undo the clips on the outer edge of the fan.

    • Make sure the fan is disconnected from the power source before starting.

    Edit

  2. Noma Pedestal Fan Blade Replacement: step 2, image 1 of 2 Noma Pedestal Fan Blade Replacement: step 2, image 2 of 2

    • Gently remove the front piece by pulling it towards the bottom.

    • Don't pull too hard to avoid damaging the clips on the fan.

    Edit

  3. Noma Pedestal Fan Blade Replacement: step 3, image 1 of 1

    • Turn the cap clockwise and remove it.

    Edit

  5. Noma Pedestal Fan Blade Replacement: step 4, image 1 of 3 Noma Pedestal Fan Blade Replacement: step 4, image 2 of 3 Noma Pedestal Fan Blade Replacement: step 4, image 3 of 3

    • Lightly pull the faulty blade towards you.

    • Be careful while pulling to not injure yourself.

    Edit

  6. Noma Pedestal Fan Blade Replacement: step 5, image 1 of 2 Noma Pedestal Fan Blade Replacement: step 5, image 2 of 2

    • Insert the new fan blade onto the screw .

    • Make sure it's pushed all the way back.

    Edit

  7. Noma Pedestal Fan Blade Replacement: step 6, image 1 of 2 Noma Pedestal Fan Blade Replacement: step 6, image 2 of 2

    • Place the cap on the screw and tighten it by turning counterclockwise.

    Edit

  8. Noma Pedestal Fan Blade Replacement: step 7, image 1 of 2 Noma Pedestal Fan Blade Replacement: step 7, image 2 of 2

    • After placing the front piece back on, fasten the clips again.

    • Make sure you align the piece to fit perfectly on the top.

    Edit
Conclusion

This is a relatively easy process and as long as you follow our step-by-step guide it should be easy to fix.

Author

with 1 other contributor

Taha Hashmi

Member since: 01/15/24

145 Reputation

1 Guide authored

Badges: 3

Team

York University, Team P-6, O'Regan Winter 2024 Member of York University, Team P-6, O'Regan Winter 2024

YORK-O'REGAN-W24SPG6

2 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 26

All Time: 82