Introduction

To replace the Nokia X speaker; follow the steps below.

Parts

Remove the back cover of the device by applying light pressure toward the outer rim and display.
  • Remove the back cover of the device by applying light pressure toward the outer rim and display.

Add Comment

Remove 7 (size 4 M1 4*3.5) and 4(size 6 M2 6*4.5) screws using P5 hex screwdriver.
  • Remove 7 (size 4 M1 4*3.5) and 4(size 6 M2 6*4.5) screws using P5 hex screwdriver.

  • The M2 screws are shown in red.

  • The M1 screws are shown in orange.

Add Comment

Deck the Halls
With tools and Fix Kits
Gently separate the display from the chassis.
  • Gently separate the display from the chassis.

  • Slowly spread the display and chassis until the inside of the device is reachable.

  • Do not pull apart.

Add Comment

  • Using the spudger tool, release the top flex ribbon from the light swap package.

Add Comment

Use a nylon spudger to pry off the speaker and speaker gasket.
  • Use a nylon spudger to pry off the speaker and speaker gasket.

Add Comment

Put a new speaker back into the speaker gasket.
  • Put a new speaker back into the speaker gasket.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jose Maya

Member since: 03/04/2017

215 Reputation

2 Guides authored

Team

IUPUI, Team S7-G7, Wilson Spring 2017 Member of IUPUI, Team S7-G7, Wilson Spring 2017

IUPUI-WILSON-S17S7G7

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 23

All Time: 204