Image 1/1:
  • Turn the phone over so the screen is face down.

Add Comment

Image 1/2: Image 2/2:
  • Remove the back cover by locating the slit on the bottom of the phone and lifting up.

Add Comment

Image 1/1:
  • Remove the battery by lifting it out of the device.

Add Comment

Image 1/2: Four ''screw M1 .4x5.0'' Image 2/2: Two ''screw RF1 .4x4''
  • Remove the two "L-shaped" antennas by unscrewing the following screws:

    • Four screw M1 .4x5.0

    • Two screw RF1 .4x4

  • In addition to unscrewing the screws, remove the B-Cover (which will fall right out without the screws).

Add Comment

Image 1/1: Grab the half of the phone that has the keyboard on it
  • You will now have two halves of the phone.

  • Grab the half of the phone that has the keyboard on it

Add Comment

Image 1/1: Place the key pad and cover to the side for the remaining steps.
  • Remove the keyboard by unsnapping the frame and then lifting the pad out from the device.

  • Place the key pad and cover to the side for the remaining steps.

Add Comment

Image 1/1:
  • Use a blue plastic opening tool lift the motherboard out of the back cover

Add Comment

Image 1/1: USB Port
  • Look at the bottom of the motherboard to find the:

    • USB Port

  • Once you've located the USB Port you can search online or call the manufacturer to replace it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Troy Posey

Member since: 03/13/2014

268 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 20

All Time: 1,287