Nokia Lumia 925 Display Replacement
Guillermo Lara and one other contributor
Last updated on Dec 18, 2018
Views: 1.6K
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 14
- Past 30 Days:
- 67
- All Time:
- 1,571
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 3 4
3 people have marked this guide "completed." Will you be next?
4 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Better Introduction
Improve this guide by completing or revising its introduction.
What you need
Tools
-
-
Tool used on this step:Tweezers$4.99
-
Remove the sim card holder by inserting tweezers into the hole. Push down and the holder will spring back up.
-
Pull out the holder until it is completely separate.
Ask FixBot
-
-
-
Slide a plastic opening tool under the back cover.
-
Slide the tool around the outsides of the cover to fully dislodge the pins holding the cover to the phone.
-
-
-
Remove the 3 screws using the T7 Torx screwdriver.
-
Unclip the black tab connector.
-
-
-
Unclip the two orange tabs.
-
Remove the four silver screws using the T5 Torx screwdriver.
-
-
-
-
Remove the motherboard by sliding tweezers between it and the back of the screen. Lift up.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
University of North Texas, Team S4-G6, Raign Fall 2018 Member of University of North Texas, Team S4-G6, Raign Fall 2018
UNT-RAIGN-F18S4G6
4 Members
60 Guides authored
