Introduction

This Guide will show how the remove the phone's battery charger connector.

Parts

No parts required.

Press the button to remove the back cover.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Add Comment

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Add Comment

  • Grip the front cover from the bottom.

Add Comment

  • Lift the front cover off.

Add Comment

  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Add Comment

  • Insert spudger along edge of assembly and gently lift assembly away from case

Add Comment

  • Remove assembly from phone

Add Comment

  • The logic board now sits on top of the phone.

Add Comment

  • Lift the logic board out of the phone.

Add Comment

  • Locate battery charger connector

Add Comment

  • Grasp top and bottom of battery charger connector on the left side

Add Comment

  • Lift out the battery charger connector

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Member since: 10/05/2010

1 Reputation

7 Guides authored

Team

Cal Poly, Team 22-3, Maness Fall 2010 Member of Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,792