Press and hold the battery release button and slide the battery away from the Nokia logo Press and hold the battery release button and slide the battery away from the Nokia logo
  • Press and hold the battery release button and slide the battery away from the Nokia logo

Slide the SIM card lock away from the SIM card. The SIM card pops out. Remove the SIM card. The SIM card pops out. Remove the SIM card.
  • Slide the SIM card lock away from the SIM card.

  • The SIM card pops out. Remove the SIM card.

Unscrew and remove the four T6 Torx screws.
  • Unscrew and remove the four T6 Torx screws.

Needs updating with a picture with no SIM card.

Mustafa - Reply

A comment for anyone wanting to clean the metal contacts to improve keypad response, make sure you spray iso alcohol onto a lint free cloth and wipe the contacts, not onto the device itself and definitely not onto the LCD screen, as it can leave a marl on the screen. Luckily it evaporated eventually but only after 48hrs...

John - Reply

New Battery = Faster iPhone
Fix Kits starting at $16.99
Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone. Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone. Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone.
  • Insert a plastic opening tool between the faceplate and the black backplate. Gently pry them apart, working from the lower end to the upper side of the phone.

Use the plastic opening tool to separate the top part of the backplate. The plastic clips at the top require slightly more force to separate. The plastic clips at the top require slightly more force to separate.
  • Use the plastic opening tool to separate the top part of the backplate.

  • The plastic clips at the top require slightly more force to separate.

Remove the screw holding the antenna to the circuit board. Carefully lift off the antenna from the circuit board.
  • Remove the screw holding the antenna to the circuit board.

  • Carefully lift off the antenna from the circuit board.

Lift off the motherboard from the faceplate.
  • Lift off the motherboard from the faceplate.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Mustafa

Member since: 09/23/2010

133 Reputation

8 Guides authored

Team

Cal Poly, Team 14-41, Forte Fall 2010 Member of Cal Poly, Team 14-41, Forte Fall 2010

CPSU-FORTE-F10S14G41

5 Members

16 Guides authored

This includes removing the antenna, since it's just one screw.

The antenna guide talks about "replacing the antenna."

Mustafa - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 25

All Time: 5,898