Introduction

This guide will show you how to remove the faceplate. With the faceplate removed, you can clean the keypad if it is sticking or completely replace the keypad if it is broken.

Parts

No parts required.

  1. Using your thumbs, press and slide down the back cover of the Nokia 1010.
    • Using your thumbs, press and slide down the back cover of the Nokia 1010.

    Add Comment

  2. Insert the prying tool in the notch above the battery.
    • Insert the prying tool in the notch above the battery.

    • Once the prying tool is inserted, lift up the battery.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Insert the prying tool between the seam of the faceplate and the body.

    Add Comment

    • Starting from the bottom of the phone, begin prying around the base of the phone alternating form left to right.

    Add Comment

    • As the base loosens, slowly increase the separation between the plates and the body of the phone.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 529