Introduction

This guide shows users how to replace defective and/or broken batteries in their Wii U Pro controller.

Parts

Start by turning the controller over to reveal the battery cover, as pictured on the left. Use the J000 screwdriver to remove the screw securing the battery cover.
  • Start by turning the controller over to reveal the battery cover, as pictured on the left. Use the J000 screwdriver to remove the screw securing the battery cover.

Add Comment

Use the plastic spudger to remove the battery from the controller by inserting the spudger into the small gap located at the right end of the battery. Once inserted, use the spudger as a lever to pry up and remove the battery from the controller's battery compartment.
  • Use the plastic spudger to remove the battery from the controller by inserting the spudger into the small gap located at the right end of the battery. Once inserted, use the spudger as a lever to pry up and remove the battery from the controller's battery compartment.

Add Comment

With the old battery removed and the compartment empty, the controller is now ready for a new battery. (If needed)
  • With the old battery removed and the compartment empty, the controller is now ready for a new battery. (If needed)

Add Comment

Finish Line

One other person completed this guide.

Chris Felder

Member since: 09/17/2015

147 Reputation

1 Guide authored

Team

IUPUI, Team 2-2, Harley Fall 2015 Member of IUPUI, Team 2-2, Harley Fall 2015

IUPUI-HARLEY-F15S2G2

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 44

All Time: 784