What you need
-
-
-
Use a JIS 00 driver to remove the 1.7 mm‑long black screw securing each hinge cover to the kickstand (two screws total).
Ask FixBot
-
-
-
Use your fingers to pull one of the hinge covers at a downward angle away from its hinge to remove it.
-
-
-
-
Use your fingers to fold both hinges as far back as they'll go.
-
-
-
Use a JIS 00 driver to remove the two 2.3 mm‑long silver screws securing each hinge to the kickstand (four screws in total).
-
-
-
Lift one of the hinges off its alignment peg on the kickstand to remove it.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
