What you need
-
-
-
Align one of the hinges with its alignment peg on the kickstand and set it into place.
-
Use a JIS 00 driver to install the two 2.3 mm‑long silver screws securing the hinge.
Ask FixBot
-
-
-
Align the other hinge with its alignment peg on the kickstand and set it into place.
-
Use a JIS 00 driver to install the two 2.3 mm‑long silver screws securing the hinge.
-
-
-
-
Use your fingers to pull the hinges open until they're fully straight.
-
-
-
Align one of the hinge covers with its respective hinge and press it into place.
-
-
-
Use a JIS 00 driver to install the 1.7 mm‑long black screw securing each hinge cover to the kickstand (two screws total).
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
