Prerequisite Only
This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.
What you need
Tools
-
-
Spudger4.9
-
-
-
-
-
Slide the fan into its recess. Ensure its cable slides underneath the edge of the board.
-
Align the fan with its screw posts on the frame.
-
-
-
-
Use tweezers or your fingers to slide the fan cable into its ZIF connector until it's fully seated.
-
Flip the hinged locking flap down to secure the cable.
-
-
To reassemble your device, follow these instructions in reverse order.