Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Nintendo 3DS Upper Display Assembly Replacement

Views: 645

View statistics:

Past 24 Hours:
0
Past 7 Days:
7
Past 30 Days:
20
All Time:
645
Comments: 4

4 comments on steps.

Completed: 0

No one has marked this guide "completed." Will you be the first?

Favorites: 1

1 person has favorited (and subscribed to) this guide. Will you be next?

Time Required: No estimate
Difficulty: Moderate
Prerequisite Only

This is a prerequisite-only guide! This guide is part of another procedure and isn’t meant to be used alone.

Nintendo 3DS Upper Display Assembly Replacement

Introduction

Go to step 1 ↓

This guide is a prerequisite to removing the upper LCD, speakers, Wi-Fi antenna, and cameras.

What you need

Tools

  • Metal Probe
    5
    1. Nintendo 3DS Upper Display Assembly Replacement, Upper Display Assembly: step 1, image 1 of 1
      • Remove the 3D adjustment switch from the front display bezel.

      • This step is not necessary for disassembly, but the switch is likely to fall out on its own. By removing it yourself, you reduce the chance of losing it.

      Ask FixBot

      Add Comment

    2. Nintendo 3DS Upper Display Assembly Replacement: step 2, image 1 of 3 Nintendo 3DS Upper Display Assembly Replacement: step 2, image 2 of 3 Nintendo 3DS Upper Display Assembly Replacement: step 2, image 3 of 3
      • Insert a metal probe into the space above the ABXY buttons with the point touching the metal hinge.

      • Push the hinge towards the center of the upper case. This will require a fair amount of force.

      • Before and after images of the hinge location when looking at the back of the upper display are shown.

      Ask FixBot

      Add Comment

    3. Nintendo 3DS Upper Display Assembly Replacement: step 3, image 1 of 3 Nintendo 3DS Upper Display Assembly Replacement: step 3, image 2 of 3 Nintendo 3DS Upper Display Assembly Replacement: step 3, image 3 of 3
      • Before proceeding, note how the 3 ribbon cables are oriented (what direction the gold contacts face) and layered together (which cable is on top of which). The cables are too short to reach if they are threaded through in any other orientation.

      • Slowly pull the upper display assembly away from the upper case.

      • Make sure that the various ribbon cables are being fed through the slit in the upper case.

      • Separate the upper display assembly from the upper case.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

with

David Hodson

Member since: 04/13/10

157,422 Reputation

127 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 20

All Time: 645