Ninja Professional BL610 Fan Replacement

Introduction

In this guide we will be removing the blender base and the component housing to get to the fan.

Remove six screws (12mm long, 6mm head diameter) from bottom of the blender using a Phillips #2 screwdriver

Remove six screws (12mm long, 6mm head diameter) from component housing using Phillips #2 screwdriver.

Using a needle nose pliers, remove nut holding fan in-place. Be careful with fan blades and use a glove or a thick cloth to protect hands.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Member since: 09/27/17

482 Reputation

4 Guides authored

USFT-BOCZAR-F17S14G3

4 Members

4 Guides authored