Introduction

This guide will show how to replace the power cord.

  1. Take out the three 15 mm Phillips #1 screws.
    • Take out the three 15 mm Phillips #1 screws.

    • Remove the 15mm T10 screw.

    • Place the 4 screws on the magnetic mat.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Remove the gray base by lifting upwards and placing to the side.
    • Remove the gray base by lifting upwards and placing to the side.

    Add Comment

    • Remove plastic coverings and aluminum wrap to unattach the power cord.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Cameron Just

Member since: 01/20/2016

379 Reputation

3 Guides authored

Team

USF Tampa, Team 15-1, Remmell Spring 2016 Member of USF Tampa, Team 15-1, Remmell Spring 2016

USFT-REMMELL-S16S15G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 49

All Time: 1,452