Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Ninja Foodi SP101 Control Panel Replacement

Introduction

The control panel on your Ninja Foodi SP101 is the only way to interact with the oven. It is responsible for controlling the temperature, the mode, and the remaining time to cook. A non-functioning control panel prevents the user from interacting with the device.

What you need

  1. Ninja Foodi SP101 Control Panel Replacement, Feet: step 1, image 1 of 2 Ninja Foodi SP101 Control Panel Replacement, Feet: step 1, image 2 of 2

    • Use a TR10 screwdriver to remove the four 11mm screws holding the black lever bar in place.

    Edit

  2. Ninja Foodi SP101 Control Panel Replacement: step 2, image 1 of 1

    • Remove the black lever bar.

    Edit

  3. Ninja Foodi SP101 Control Panel Replacement, Side Panels: step 3, image 1 of 1

    • Use a Phillips #1 screwdriver to remove the three 8mm screws on each side of the back panel.

    Edit

  4. Ninja Foodi SP101 Control Panel Replacement: step 4, image 1 of 2 Ninja Foodi SP101 Control Panel Replacement: step 4, image 2 of 2

    • Flip the device upside down and open the bottom panel.

    • Remove the 3 x philips #1 screws along the top edge of the interior using a screwdriver. The Bottom 2 do not have to be removed.

    Edit

  6. Ninja Foodi SP101 Control Panel Replacement: step 5, image 1 of 3 Ninja Foodi SP101 Control Panel Replacement: step 5, image 2 of 3 Ninja Foodi SP101 Control Panel Replacement: step 5, image 3 of 3

    • Remove the control side panel. To remove it, push forward towards then front control panel to release the tabs out of the main body. Fold away the side panel when the tabs have visually released from their slots in the main body.

    Edit

  7. Ninja Foodi SP101 Control Panel Replacement: step 6, image 1 of 2 Ninja Foodi SP101 Control Panel Replacement: step 6, image 2 of 2

    • Lift the handle and pull the side panel out.

    • Remove the handle side panel.

    Edit

  8. Ninja Foodi SP101 Control Panel Replacement, Control Panel: step 7, image 1 of 1

    • Remove the 10mm screw using the Phillips #1 screwdriver.

    • This screw connects the motherboard to the motor.

    Edit

  9. Ninja Foodi SP101 Control Panel Replacement: step 8, image 1 of 3 Ninja Foodi SP101 Control Panel Replacement: step 8, image 2 of 3 Ninja Foodi SP101 Control Panel Replacement: step 8, image 3 of 3

    • Locate the control panel.

    • Slide the top panel outwards and to the right.

    Edit

  10. Ninja Foodi SP101 Control Panel Replacement: step 9, image 1 of 1

    • Remove the three 8 mm screws with the Phillips #1 screwdriver.

    • These are located on the control panel side that was facing inward.

    Edit

  11. Ninja Foodi SP101 Control Panel Replacement: step 10, image 1 of 2 Ninja Foodi SP101 Control Panel Replacement: step 10, image 2 of 2

    • Unclip the wires from the motherboard.

    Edit

  12. Ninja Foodi SP101 Control Panel Replacement: step 11, image 1 of 1

    • Remove the control panel.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 2 other contributors

Griffin Peterson

Member since: 01/30/24

652 Reputation

6 Guides authored

Badges: 12

+9 more badges

Team

Utah Tech University, Team 1-4, McMurrin Spring 2024 Member of Utah Tech University, Team 1-4, McMurrin Spring 2024

UTAHTECH-MCMURRIN-S24S1G4

2 Members

9 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 29

Past 30 Days: 127

All Time: 2,264