Fix Your Stuff Community Store

Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement

Introduction

This is very similar to replacing the tubes in the device, which is show in another repair guide created for the ninja coffee bar. Be very careful with the screws because they are very small. We would suggest the magnetic mat provided by iFixit so you don't lose the screws. Just like the tube repair guide, be careful removing the protective plate because there are a lot of wires that can not be disconnected. Also, make sure to take some pictures of the wiring just incase some of them do slip loose.

What you need

  1. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement, Valve: step 1, image 1 of 1

    • Unscrew eight 6mm screws with Phillips head #1 screwdriver

    • Remove bottom cover

    Edit

  3. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: step 2, image 1 of 1

    • Unscrew three 6mm screws with Phillips head #1 screwdriver

    • Remover tube protection plate

    Edit

  4. Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: step 3, image 1 of 2 Ninja Coffee Bar® Single-Serve System Water Regulating Valve Replacement: step 3, image 2 of 2

    • Detach valve tubes from valve by squeezing pins and pull tubes away from valve

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 3 other contributors

Naser Aldousari

Member since: 10/10/17

310 Reputation

3 Guides authored

Badges: 8

+5 more badges

Team

USF Tampa, Team S13-G69, Cagle Fall 2017 Member of USF Tampa, Team S13-G69, Cagle Fall 2017

USFT-CAGLE-F17S13G69

4 Members

3 Guides authored

2 Comments

Where can I get the replacement water valve?

Mark Peters - Reply

Anyone have a source for the valve?

ErrorCode67 - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 14

All Time: 1,914