Skip to main content

Nikon N80 Lens Mount (aka Bayonet Mount) Replacement

What you need

  1. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement, Lens Mount (aka Bayonet Mount): step 1, image 1 of 1
    • Make sure the On/Off switch is in the Off position.

  2. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: step 2, image 1 of 1
    • Place the camera so the lens is facing up.

    • If your camera has a lens on, remove it by pushing and holding the lens release button and turning the lens clockwise until it comes off.

  3. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: step 3, image 1 of 1
    • Use a PH00 Phillips screwdriver to remove the five 4.8mm screws on the silver lens mount.

  4. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: step 4, image 1 of 1
    • Remove the old lens mount and place the new one on.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Maegan Viloria

Member since: 09/14/15

717 Reputation

5 Guides authored

Team

CSU Fullerton, Team 1-7, Bruce Fall 2015 Member of CSU Fullerton, Team 1-7, Bruce Fall 2015

CSUF-BRUCE-F15S1G7

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 10

Past 30 Days: 50

All Time: 1,884