Introduction

Is the lens mount in your camera damaged or broken? It might be time to replace it with a new one! This guide will explain how to replace the lens mount (also known as bayonet mount) in a Nikon N80/F80 Camera.

Tools

Parts

No parts required.

Image 1/1:
  • Make sure the On/Off switch is in the Off position.

Add Comment

Image 1/1: If your camera has a lens on, remove it by pushing and holding the lens release button and turning the lens clockwise until it comes off.
  • Place the camera so the lens is facing up.

  • If your camera has a lens on, remove it by pushing and holding the lens release button and turning the lens clockwise until it comes off.

Add Comment

Image 1/1:
  • Use a PH00 Phillips screwdriver to remove the five 4.8mm screws on the silver lens mount.

Add Comment

Image 1/1:
  • Remove the old lens mount and place the new one on.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Maegan Viloria

Member since: 09/14/2015

618 Reputation

6 Guides authored

Team

CSU Fullerton, Team 1-7, Bruce Fall 2015 Member of CSU Fullerton, Team 1-7, Bruce Fall 2015

CSUF-BRUCE-F15S1G7

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 8

Past 30 Days: 29

All Time: 325