Introduction

Use this guide to replace a broken memory door.

Parts

No parts required.

  1. Open the memory door by pushing the memory door retainer away from the LCD.
    • Open the memory door by pushing the memory door retainer away from the LCD.

  2. Remove the two 2.8 mm Phillips screws securing the memory door to the rear case.
    • Remove the two 2.8 mm Phillips screws securing the memory door to the rear case.

    • Remove the memory door from the D70.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 10

All Time: 4,983