Nikon D70 Bottom Cover Replacement

Remove the bottom cover to access most components inside the D70.

Edit Step 1 Battery  ¶ 

Image #1

Edit Step 1 Battery  ¶ 

  • Use your finger tip to pull the battery release tab toward the center of the D70.

  • Open the battery door and rotate it away from the bottom cover.

Edit Step 2  ¶ 

Image #1

Edit Step 2  ¶ 

  • Pull the battery out of the D70.

  • It may be necessary to wiggle the battery while pulling to free it from its pocket in the case.

Edit Step 3 Bottom Cover  ¶ 

Image #1

Edit Step 3 Bottom Cover  ¶ 

  • Remove the following eight screws securing the bottom cover to the D70:

    • Six 5.8 mm Phillips screws

    • One 10.7 mm Phillips screws

    • One 8.2 mm Phillips screws

Edit Step 4  ¶ 

Image #1

Edit Step 4  ¶ 

  • Carefully pull the bottom cover to separate it from the body of the D70.

  • Remove the bottom cover from the D70.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Nikon D70 device page.

Required Tools

Phillips #00 Screwdriver

$5.95 · 50+ In stock

Recommended Tools

54 Bit Driver Kit

$29.95 · 50+ In stock

Pro Magnetic Project Mat

$19.95 · 50+ In stock

Pro Tech Screwdriver Set

$59.95 · 50+ In stock

Anti-Static Project Tray

$4.95 · 50+ In stock

Popular Products

iPad 3/4 Display Bezel

$14.95 · 16 In stock

iPhone 5c Replacement Battery

$24.95 · 42 In stock

Heavy-Duty Spudger

$4.95 · 50+ In stock

Phillips #000 Screwdriver

$5.95 · 50+ In stock

Comments Comments are onturn off

No comments.

View Statistics:

Past 24 Hours: 2

Past 7 Days: 9

Past 30 Days: 31

All Time: 7,152