Introduction

This guide will show you how to properly remove your camera's battery.

Tools

No tools required.

Parts

Image 1/1:
  • First, power off the device.

Add Comment

Image 1/3: Open the battery compartment door by sliding the release button towards the lens. Image 2/3: This will cause the door to "pop" open slightly Image 3/3: This will cause the door to "pop" open slightly
  • Set the camera so that it is sitting on its side.

  • Open the battery compartment door by sliding the release button towards the lens.

  • This will cause the door to "pop" open slightly

Add Comment

Image 1/2: Push the yellow tab lock towards the center to release the battery. Image 2/2: This will cause the battery to jump up as there is a spring at the bottom.
  • Now lift open the battery compartment door.

  • Push the yellow tab lock towards the center to release the battery.

  • This will cause the battery to jump up as there is a spring at the bottom.

  • Pull straight out, slowly on the battery.

  • Make sure you pay attention to which way the battery goes .

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel Eagan

Member since: 02/10/2016

537 Reputation

5 Guides authored

Team

USF Tampa, Team 4-4, Lacy Spring 2016 Member of USF Tampa, Team 4-4, Lacy Spring 2016

USFT-LACY-S16S4G4

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 13

All Time: 265