Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

The reader will learn how to replace the back panel/touch screen of the Nikon Coolpix S800c. This may be necessary due to body damage or an improperly working screen that may be defective or cracked screen.

  1. Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit). Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).
    • Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

  2. LCD iPhone Screen Fix Kits

    The budget option, covered by our Lifetime Warranty.

    Shop Kits

    LCD iPhone Screen Fix Kits

    Cut repair costs, not quality.

    Shop Kits
  3. Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera. Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.
    • Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Ilyasah Muhammad

Member since: 01/30/2018

234 Reputation

2 Guides authored

Team

Baylor, Team S2-G6, Johnson Spring 2018 Member of Baylor, Team S2-G6, Johnson Spring 2018

BU-JOHNSON-S18S2G6

3 Members

5 Guides authored

One Comment

Many steps missing!! There are TWO more screws than the guide tells you about. Plus there’s no mention that after you finally get the camera split, you can’t just tug it apart—the motherboard is attached to the LCD. This guide is about worse than none at all!!

Brian Capouch - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 179