Parts

No parts required.

Image 1/3: Image 2/3: Image 3/3:
  • Locate the left side of the camera

Add Comment

Image 1/1:
  • Remove the two 0.1 mm screws using a Phillips Head screwdriver in order to properly open the camera

Add Comment

Image 1/1: Remove the plastic cover from the camera
  • Carefully lift the plastic back cover away from the camera

  • Remove the plastic cover from the camera

Add Comment

Image 1/2: The plastic cover has been properly removed and is ready to be replaced Image 2/2: The plastic cover has been properly removed and is ready to be replaced
  • Carefully push the rubber button cover up and out of the plastic cover

  • The plastic cover has been properly removed and is ready to be replaced

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andy Powers

Member since: 09/22/2015

355 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 125