Introduction

In order to replace the motherboard, LCD screen, or speakers in the Nikon Coolpix S33 camera, the back cover needs to come off. This guide will show users how to remove the cover by taking out the screws, and prying off the back cover.

Remove battery before initiating this step to avoid the possibility of electric shock. Remove all four T5 Torx screws from the exterior of the camera.
  • Remove battery before initiating this step to avoid the possibility of electric shock.

  • Remove all four T5 Torx screws from the exterior of the camera.

  • Remove all three T5 Torx screws located at the bottom of the camera next to the battery compartment.

Add Comment

Black Friday
Broken doesn't stand a chance.
Remove the two screws located above the HDMI and USB logos that are inside the camera's battery compartment using a JIS000 screwdriver.
  • Remove the two screws located above the HDMI and USB logos that are inside the camera's battery compartment using a JIS000 screwdriver.

Add Comment

Using a plastic opening tool, gently remove the back cover from the camera. Using a plastic opening tool, gently remove the back cover from the camera.
  • Using a plastic opening tool, gently remove the back cover from the camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Maria Frias

Member since: 02/18/2016

504 Reputation

4 Guides authored

Team

USF Tampa, Team 16-3, Blackwell Winter 2016 Member of USF Tampa, Team 16-3, Blackwell Winter 2016

USFT-BLACKWELL-W16S16G3

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 14

All Time: 932