Turn the front of the camera toward you.
  • Turn the front of the camera toward you.

Add Comment

On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.
  • On the left side of the camera, use a Phillips #00 Precision Screwdriver to remove the two screws.

Add Comment

  • On the right side of the camera, remove the first visible screw.

Add Comment

  • Lift the HDMI and A/V OUT cover to access the hidden screw and remove.

Add Comment

  • Flip the camera upside down and remove the seven marked screws.

Add Comment

  • Remove the two screws hidden underneath the display panel.

Add Comment

  • Use a plastic opening tool to gently loosen up the sides of the camera.

Add Comment

Add Comment

  • Now you have partial access to the camera's motherboard.

  • Remove the five indicated screws that are attached to the metal plate.

Add Comment

  • Remove the hidden top screw that is attached to the metal plate.

Add Comment

  • Use a plastic opening tool to carefully loosen the metal plate.

  • Remove the panel to access the camera's motherboard.

Add Comment

  • Now you have access to the camera's motherboard

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Rikki Brown

Member since: 01/09/2015

243 Reputation

2 Guides authored

Team

USF Tampa, Team 1-1, Tanski Winter 2015 Member of USF Tampa, Team 1-1, Tanski Winter 2015

USFT-TANSKI-W15S1G1

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 11

Past 30 Days: 36

All Time: 1,050