Skip to main content

Nikon Coolpix L810 Flash Replacement

What you need

  1. Nikon Coolpix L810 Flash Replacement, Flash: step 1, image 1 of 1
    • Remove two 5 mm Phillips #000 screws below the flash component.

    • In order to complete this step the flash must be open. To open the flash press the button located above the lens on the leftward side of the camera.

  2. Nikon Coolpix L810 Flash Replacement: step 2, image 1 of 1
    • Use blue plastic opening tool to pry open the casing for the flash.

  3. Nikon Coolpix L810 Flash Replacement: step 3, image 1 of 1
    • Remove the plastic casing surrounding the flash.

  4. Nikon Coolpix L810 Flash Replacement: step 4, image 1 of 2 Nikon Coolpix L810 Flash Replacement: step 4, image 2 of 2
    • Pull the wires connecting the flash out of the camera.

  5. Nikon Coolpix L810 Flash Replacement: step 5, image 1 of 3 Nikon Coolpix L810 Flash Replacement: step 5, image 2 of 3 Nikon Coolpix L810 Flash Replacement: step 5, image 3 of 3
    • Unsolder the wires that connect the flash component.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Emilio Mena

Member since: 01/14/15

752 Reputation

4 Guides authored

Team

UW Tacoma, Team 3-1, Rose Winter 2015 Member of UW Tacoma, Team 3-1, Rose Winter 2015

UWT-ROSE-W15S3G1

4 Members

8 Guides authored

4 Comments

It's not a comment, but where did you obtain the replacement flashbulb?

hgdddee - Reply

the heading says no parts required. but I think i need a new flashbulb? any idea what the type is or where to buy it ?

wildstreaksavannahs - Reply

I can't get into bulb

Szabolcs Demeter - Reply

<a href="https://www.w3schools.com/">Visit W3Schools.com!</a> n advmd vdsm vs ds m

nirik - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 18

All Time: 2,167