Introduction

This guide will explain how to replace the selection buttons on the camera. There are no hazards associated with this replacement. Let's get started!

Parts

No parts required.

Remove the six(3.93mm screws) on the outside of the camera using a Phillips 00 screwdriver. Remove the six(3.93mm screws) on the outside of the camera using a Phillips 00 screwdriver. Remove the six(3.93mm screws) on the outside of the camera using a Phillips 00 screwdriver.
  • Remove the six(3.93mm screws) on the outside of the camera using a Phillips 00 screwdriver.

Add Comment

Open the battery compartment door and pull the black back face apart from the front red face.
  • Open the battery compartment door and pull the black back face apart from the front red face.

Add Comment

Secure the black back case in hand and remove selection buttons from the case by pushing them upward and replace them with a new set of buttons.
  • Secure the black back case in hand and remove selection buttons from the case by pushing them upward and replace them with a new set of buttons.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sherika Jacobs

Member since: 09/15/2016

333 Reputation

3 Guides authored

Team

USF Tampa, Team 2-4, Blackwell Fall 2016 Member of USF Tampa, Team 2-4, Blackwell Fall 2016

USFT-BLACKWELL-F16S2G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 91