Nexus One Flash Replacement

Step 1 Rear Cover



• Using two fingers, push up on the rear cover.
Step 2

• The rear cover slides up and off.
Step 3 Battery
• Using the plastic opening tools, pry the left bottom corner of the battery up.
Step 4
• Pull the battery up and out.
Step 5 Battery Housing
• Remove the two Torx T5 screws.
• Remove the one Philips #00 screw.
Step 6
• Using the plastic opening tool, pry up the battery housing upwards.
• Push pry tool down, undoing the plastic tab.
Step 7
• Pry the upper left tab open on the battery housing.
Step 8
• Pry the top tab of the battery housing.
Step 9
• Pry the right side tab of the battery housing.
Step 10
• Pull up on the battery housing.
• Slide the battery housing out to remove it.
Step 11 Flash
• Insert the spudger under the bottom of the flash board
• Twist the spudger to lift and release the flash board.

Author

with 3 other contributors

Niklas Johnson

Member since: 01/31/12

1,207 Reputation

18 Guides authored

Badges: 11

• 
• 
• 

+8 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview