Introduction

The button sheet on the Nextplay NP109CR is sometimes placed incorrectly on the device. This prevents the buttons from working correctly. This guide will fix and place the buttons correctly on to the sheet. Use this guide to disassemble the device to reach the buttons. Follow the step by step instructions to re-position the buttons.

Parts

No parts required.

Image 1/1:
  • Unscrew the two screws with a Phillips #0 screwdriver on the top side of the device right in front of the eight buttons.

Add Comment

Image 1/1:
  • Remove the lid from the device.

Add Comment

Image 1/1:
  • Unscrew the four screws with a Phillips #0 Screwdriver from the pink button sheet.

Add Comment

Image 1/2: Then align the pink button sheet onto the black circuit sheet. Image 2/2: Then align the pink button sheet onto the black circuit sheet.
  • Remove the pink button sheet from the device by pulling out each button.

  • Then align the pink button sheet onto the black circuit sheet.

Add Comment

Conclusion

Reverse these steps to reassemble the device.

One other person completed this guide.

Chotipong Chamchalaem

Member since: 09/26/2012

71 Reputation

2 Guides authored

Team

Cal Poly, Team 7-50, Forte Fall 2012 Member of Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 19

All Time: 203