Fix Your Stuff Community Store

Newport e500 Top Cover Disassembly

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

Introduction

If you need to replace the top cover or gain access to other components, this guide will detail its removal. For this guide, you will need a medium sized wrench to remove the hex nuts. For more information refer to page 39 of the service manual.

What you need

  1. Newport e500 Top Cover Disassembly, Newport e500 Top Cover Disassembly: step 1, image 1 of 1

    • Place device so that the top cover is facing you.

    • Open the top cover.

    Edit

  2. Newport e500 Top Cover Disassembly: step 2, image 1 of 1

    • Remove the four hex nuts and lock washers (two at each hinge) that secure the cover to the hinges on the left side of the pneumatic box.

    Edit

  3. Newport e500 Top Cover Disassembly: step 3, image 1 of 1

    • Remove the cover and set aside. Retain hardware for re-assembly.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Jeremy

Member since: 04/07/20

589 Reputation

6 Guides authored

Badges: 5

+2 more badges

Team

Cal Poly, Team S7-G16, Paton Spring 2020 Member of Cal Poly, Team S7-G16, Paton Spring 2020

CPSU-PATON-S20S7G16

3 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 79