Fix Your Stuff Community Store

Newport e500 Flow Sensor Cover Disassembly

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

Introduction

This guide deals with an important prerequisite, the removal of the flow sensor. Once removed, many more components can be accessed on the top of the e500 ventilator. This step is very simple, but must be done carefully as there are a lot of exposed parts in the process. For more information refer to page 43 of the service manual.

What you need

  1. Newport e500 Flow Sensor Cover Disassembly, Newport e500 Flow Sensor Cover Disassembly: step 1, image 1 of 1

    • Remove the three screws and washers that secure the flow sensor cover to the pneumatic box assembly. Retain the hardware for re-assembly.

    Edit

  2. Newport e500 Flow Sensor Cover Disassembly: step 2, image 1 of 1

    • Remove the flow sensor cover.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Jared McMullen

Member since: 05/02/18

473 Reputation

4 Guides authored

Badges: 7

+4 more badges

Team

Cal Poly, Team S7-G16, Paton Spring 2020 Member of Cal Poly, Team S7-G16, Paton Spring 2020

CPSU-PATON-S20S7G16

3 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 72