Fix Your Stuff Community Store

Newport e500 Exhalation Module Disassembly

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

Introduction

If you need to access important parts associated with the Newort e500, removal of the exhalation module is an integral step. This step serves as a common pre-requisite to completing other guides. Make sure you are careful with the outlet boot as it is fragile. For more information refer to page 42 of the service manual.

  1. Newport e500 Exhalation Module Disassembly, Newport e500 Exhalation Module Disassembly: step 1, image 1 of 1

    • Pull up and remove the flexible rubber exhalation outlet boot (push fit).

    Edit

  2. Newport e500 Exhalation Module Disassembly: step 2, image 1 of 1

    • Disconnect the tubes from both sides of the flow sensor and the two tubes from the exhalation valve.

    Edit

  3. Newport e500 Exhalation Module Disassembly: step 3, image 1 of 1

    • Pull the exhalation module straight up to remove it from the GDU.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Jared McMullen

Member since: 05/02/18

473 Reputation

4 Guides authored

Badges: 7

+4 more badges

Team

Cal Poly, Team S7-G16, Paton Spring 2020 Member of Cal Poly, Team S7-G16, Paton Spring 2020

CPSU-PATON-S20S7G16

3 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 117