Introduction

In this guide we will be removing the motherboard. The motherboard is a circuit board that contains the main components of the tablet. It connects the main accessories like the camera, battery, and screen. By following this guide, you will be able to successfully replace your motherboard on your NeuTab N7 Pro Tablet.

Power off you device before beginning disassembly.
  • Power off you device before beginning disassembly.

  • Insert plastic opening tool and pry back case away from the device, slowly moving the plastic opening tool along the device.

Add Comment

Use a soldering gun to separate all soldered wires from the motherboard. For a complete guide on how to solder, click here. For a complete guide on how to solder, click here.
  • Use a soldering gun to separate all soldered wires from the motherboard.

Add Comment

Use a spudger to carefully release the tabs on the three ZIF connectors securing the ribbon cables to the motherboard.
  • Use a spudger to carefully release the tabs on the three ZIF connectors securing the ribbon cables to the motherboard.

  • Carefully pull the ribbons out with tweezers.

Add Comment

Use Phillips #J0 Screwdriver to remove three 1mm screws from the motherboard Use Phillips #J0 Screwdriver to remove three 1mm screws from the motherboard Use Phillips #J0 Screwdriver to remove three 1mm screws from the motherboard
  • Use Phillips #J0 Screwdriver to remove three 1mm screws from the motherboard

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Travis McLean

Member since: 02/09/2016

322 Reputation

2 Guides authored

Team

USF Tampa, Team 7-1, Cheng Spring 2016 Member of USF Tampa, Team 7-1, Cheng Spring 2016

USFT-CHENG-S16S7G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 11

All Time: 266