Introduction

The device is accompanied with a flashlight in order to be used effectively in the dark. The light will only turn on if using the proper batteries. This guide will show you how to remove the batteries from their compartment and properly place in three Triple A batteries. Following these steps will allow the flashlight to function properly.

Parts

No parts required.

Place the screwdriver on the screw and begin taking it out.
  • Place the screwdriver on the screw and begin taking it out.

  • Turn the screw counter-clockwise.

Add Comment

The lid that covers the batteries should then rise up slightly, allowing it to be  pulled off.
  • The lid that covers the batteries should then rise up slightly, allowing it to be pulled off.

Add Comment

  • Remove the batteries.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Brenda

Member since: 09/28/2016

43 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 12

All Time: 366