Parts

No parts required.

Turn the Neo3DO face down so that the logo is facing toward you. Insert the plastic opening tool between the metal frame and the plastic back panel, as shown. Insert the plastic opening tool between the metal frame and the plastic back panel, as shown.
  • Turn the Neo3DO face down so that the logo is facing toward you.

  • Insert the plastic opening tool between the metal frame and the plastic back panel, as shown.

Add Comment

Gently pry the back panel upwards. Ensure the tool does not slip into the device and damage the internals.
  • Gently pry the back panel upwards.

  • Ensure the tool does not slip into the device and damage the internals.

Add Comment

Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet. Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet.
  • Once the back panel has been pried away from the bottom and sides of the Neo3DO, lift the back panel up and away from the tablet.

Add Comment

When replacing the back panel, place the top edge of the back panel against the top edge of the Neo3DO, as shown.
  • When replacing the back panel, place the top edge of the back panel against the top edge of the Neo3DO, as shown.

  • The top edge of the device is the edge closest to the camera. The top of the back panel is the side with the hole for the camera.

Add Comment

Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector. Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector. Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector.
  • Starting with an open back panel, take your tweezers and use them to pull back the black tabs on the connector.

Add Comment

Pull the wire completely from the socket.
  • Pull the wire completely from the socket.

  • Check the metallic parts for signs of damage or corrosion. If either exists, you might need to replace the battery entirely.

Add Comment

Re-insert the wire into the socket.
  • Re-insert the wire into the socket.

Add Comment

Using the tweezers, push the black tabs back in. Using the tweezers, push the black tabs back in. Using the tweezers, push the black tabs back in.
  • Using the tweezers, push the black tabs back in.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Michael Whitehead

Member since: 09/26/2016

201 Reputation

2 Guides authored

Team

USF Tampa, Team 14-3, Eyestone Fall 2016 Member of USF Tampa, Team 14-3, Eyestone Fall 2016

USFT-EYESTONE-F16S14G3

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 58