Fix Your Stuff Community Store

Neato Botvac D8000 Brushes Replacement

Introduction

If your robot is passing over surfaces and not collecting debris, by cleaning or replacing the brushes could help.

Here are step by step instructions in how to get to the brushes.

What you need

  1. Neato Botvac D8000 Brushes Replacement, Brushes: step 1, image 1 of 1

    • Place the vacuum on its back so the brushes are visible.

    Edit

  2. Neato Botvac D8000 Brushes Replacement: step 2, image 1 of 3 Neato Botvac D8000 Brushes Replacement: step 2, image 2 of 3 Neato Botvac D8000 Brushes Replacement: step 2, image 3 of 3

    • Remove the four 10 mm screws with a Torx T10 screwdriver.

    Edit

  4. Neato Botvac D8000 Brushes Replacement: step 3, image 1 of 2 Neato Botvac D8000 Brushes Replacement: step 3, image 2 of 2

    • Remove the rotary brush simply by grabbing it firmly and pulling it off.

    • Once you have removed your rotary brush and 4 bolts, you can easy remove the brush guard.

    Edit

  5. Neato Botvac D8000 Brushes Replacement: step 4, image 1 of 2 Neato Botvac D8000 Brushes Replacement: step 4, image 2 of 2

    • Remove the brush by simply pulling it out.

    • From there you can clean it or replace the brush with a new one.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Yeritza Quiroz

Member since: 03/22/18

159 Reputation

1 Guide authored

Badges: 2

Team

Sam Houston State, Team S17-G6, Blackburne Spring 2018 Member of Sam Houston State, Team S17-G6, Blackburne Spring 2018

SHSU-BLACKBURNE-S18S17G6

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 10

All Time: 701