Introduction

Use this guide to replace the rear case on your Nabi Jr.

Remove the red rubber case from the device. This should come off with ease.
  • Remove the red rubber case from the device. This should come off with ease.

Add Comment

Turn the device so the screen is facing away from you.
  • Turn the device so the screen is facing away from you.

  • Using a philips head, size #00, screwdriver, remove the screws in each corner of the plastic casing.(total of 4 screws)

Add Comment

Remove the device casing using a small plastic pry bar.
  • Remove the device casing using a small plastic pry bar.

    • This might take a little bit of force to accomplish, don't be afraid to go at it with a little gusto.

Add Comment

After loosening the back cover, remove it from the device so you can get at the innards.
  • After loosening the back cover, remove it from the device so you can get at the innards.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tobias Young

Member since: 03/24/2015

21 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 205