Skip to main content

NP-R540-JA09US Keyboard Replacement

What you need

  1. NP-R540-JA09US Keyboard Replacement, Battery: step 1, image 1 of 1
    • Turn off laptop before starting.

    • Remove power cable before starting.

    • Flip the laptop over so that the bottom of the laptop is facing upwards.

  2. NP-R540-JA09US Keyboard Replacement: step 2, image 1 of 1
    • Pull the two latches outward.

  3. NP-R540-JA09US Keyboard Replacement: step 3, image 1 of 2 NP-R540-JA09US Keyboard Replacement: step 3, image 2 of 2
    • Slide the battery out of the laptop.

  4. NP-R540-JA09US Keyboard Replacement, Optical Drive: step 4, image 1 of 1
    • Remove securing screw with the PH0 head.

  5. NP-R540-JA09US Keyboard Replacement: step 5, image 1 of 1
    • Slide the optical drive out and remove it from the device.

  6. NP-R540-JA09US Keyboard Replacement, Keyboard: step 6, image 1 of 1
    • Remove the two Phillips #0 screws labeled KBD.

    • There are 5 clips along the top of the keyboard. Insert a thin opener tool (iSessamo tool or similar) between each clip and the keyboard tray to release it.

    • Make sure to pry the metal keyboard base and not the keycaps.

  7. NP-R540-JA09US Keyboard Replacement: step 8, image 1 of 1
    • Do not bend your keyboard as shown in this picture.

    • Lift the keyboard up to release catches on the sides, then slide the keyboard towards the screen to slide tabs out of the slots at the bottom.

  8. NP-R540-JA09US Keyboard Replacement: step 9, image 1 of 2 NP-R540-JA09US Keyboard Replacement: step 9, image 2 of 2
    • Disconnect the keyboard cable from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 851