NOSTALGIA KPM508 Door Tray Handle Replacement

Introduction

This guide will help the user remove the gold tray handle with a screwdriver if the handle breaks or if you wish to replace it with a different piece. Make sure the machine is unplugged and off before proceeding.

What you need

Step 1 Door Tray Handle

NOSTALGIA KPM508 Door Tray Handle Replacement, Door Tray Handle: step 1, image 1 of 1

Unplug the machine and tilt the machine on its side with the pull out tray facing up.

Edit

Step 2

With the Phillips #1 screwdriver, unscrew and remove the two , 12mm screws on the outside edges of the pull out tray as indicated. If you find difficulty unscrewing, WD-40 should help.

Edit