Parts

No parts required.

Introduction

Once the LCD Screen Cover has been removed, the LCD Screen can be accessed as shown in this guide.

Image 1/2: Once the battery cover pops up, slide the cover towards the top of the phone and lift up. Image 2/2: Once the battery cover pops up, slide the cover towards the top of the phone and lift up.
  • Slide the cover release button towards the bottom of the phone

  • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

Add Comment

Image 1/1:
  • Push the battery towards the top of the phone and lift up.

Add Comment

Image 1/3: With the help of plastic opening tools, remove the i710 name plate and Motorola logo from the backside of the phone. Image 2/3: The four screws holding the upper half of the phone together should now be visible. Image 3/3: The four screws holding the upper half of the phone together should now be visible.
  • Although the lower half of the phone in these images has been disassembled, it is not necessary for removing the LCD screen.

  • With the help of plastic opening tools, remove the i710 name plate and Motorola logo from the backside of the phone.

  • The four screws holding the upper half of the phone together should now be visible.

Add Comment

Image 1/2: Flip the phone onto its back and, with the help of a plastic opening tool, remove the metal speaker cover that is above the LCD screen. Image 2/2: Flip the phone onto its back and, with the help of a plastic opening tool, remove the metal speaker cover that is above the LCD screen.
  • With a H1.5 screwdriver, unscrew the four H1.5 sized screws from the back of the phone.

  • Flip the phone onto its back and, with the help of a plastic opening tool, remove the metal speaker cover that is above the LCD screen.

Add Comment

Image 1/3: The LCD screen should now be completely separated from the phone. Image 2/3: The LCD screen should now be completely separated from the phone. Image 3/3: The LCD screen should now be completely separated from the phone.
  • Slide a plastic opening tool along the edge of the LCD Screen Cover to separate the cover from the phone casing. Apply a small amount of force towards the cover if necessary.

  • The LCD screen should now be completely separated from the phone.

Add Comment

Image 1/3: The LCD Scren will now lift out from the phone casing. Image 2/3: Be careful not to break the speaker's ribbon cable that sits behind the LCD Screen. Image 3/3: Be careful not to break the speaker's ribbon cable that sits behind the LCD Screen.
  • Use a spudger to detach the ribbon cable connecting the the LCD Screen to the rest of the phone.

  • The LCD Scren will now lift out from the phone casing.

  • Be careful not to break the speaker's ribbon cable that sits behind the LCD Screen.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Carson Meena

Member since: 10/22/2012

16 Reputation

5 Guides authored

Team

Clemson, Team 14-2, Benson Fall 2012 Member of Clemson, Team 14-2, Benson Fall 2012

CLEM-BENSON-F12S14G2

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 333