Introduction

Once the back casing has been removed, the charger cover will be accessible for replacement.

Parts

No parts required.

Slide the cover release button towards the bottom of the phone Once the battery cover pops up, slide the cover towards the top of the phone and lift up.
  • Slide the cover release button towards the bottom of the phone

  • Once the battery cover pops up, slide the cover towards the top of the phone and lift up.

Add Comment

Push the battery towards the top of the phone and lift up.
  • Push the battery towards the top of the phone and lift up.

Add Comment

Deck the Halls
With tools and Fix Kits
With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case. Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other. Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.
  • With a T5 screwdriver, unscrew the four T5 sized screws that hold the case back cover onto the rest of the case.

  • Remove the plastic case back cover by gently pulling it away from the body of the phone, starting at one edge and working your way down to the other.

Add Comment

Once you have taken off the back cover of the phone, the charger tab can be lifted out of position on the back cover.
  • Once you have taken off the back cover of the phone, the charger tab can be lifted out of position on the back cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Caitlin Smith

Member since: 10/22/2012

4 Reputation

3 Guides authored

Team

Clemson, Team 14-2, Benson Fall 2012 Member of Clemson, Team 14-2, Benson Fall 2012

CLEM-BENSON-F12S14G2

4 Members

17 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 310