Introduction

Is your microphone not working? Here is a guide to replace the microphone. You will need to purchase a new microphone before beginning.

Image 1/2: Remove six 2.7mm Torx #3 screws. Image 2/2: Remove six 2.7mm Torx #3 screws.
  • Power off the device before beginning disassembly.

  • Remove six 2.7mm Torx #3 screws.

Add Comment

Image 1/2: Pry off the back panel using a plastic opening tool. Image 2/2: Using a plastic opening tool, slide the tool gently around the back cover to lift the cover off.
  • There is adhesive attached to the underside of the back panel. Gradually lift the panel to avoid bending it out of shape.

  • Pry off the back panel using a plastic opening tool.

  • Using a plastic opening tool, slide the tool gently around the back cover to lift the cover off.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Pry off the black cover gradually using a plastic opening tool.

Add Comment

Image 1/1: There is adhesive holding down the rubber microphone housing.
  • Gently pull up rubber housing with tweezers from above microphone.

  • There is adhesive holding down the rubber microphone housing.

Add Comment

Image 1/1:
  • Using the tweezers, gently pull up the connector off the microphone.

Add Comment

Image 1/2: Image 2/2:
  • Once the connector is removed, use the tweezers to pull up the microphone from its plastic socket.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 70