Introduction

Having troubles with your back camera not working? Here is a guide to replace it!

Power off the device before beginning disassembly. Remove six 2.7mm Torx #3 screws.
  • Power off the device before beginning disassembly.

  • Remove six 2.7mm Torx #3 screws.

Add Comment

There is adhesive attached to the underside of the back panel. Gradually lift the panel to avoid bending it out of shape. Pry off the back panel using a plastic opening tool.
  • There is adhesive attached to the underside of the back panel. Gradually lift the panel to avoid bending it out of shape.

  • Pry off the back panel using a plastic opening tool.

  • Using a plastic opening tool, slide the tool gently around the back cover to lift the cover off.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Pry off the black cover gradually using a plastic opening tool. Pry off the black cover gradually using a plastic opening tool. Pry off the black cover gradually using a plastic opening tool.
  • Pry off the black cover gradually using a plastic opening tool.

Add Comment

Gently remove the blue tape near the camera using the tweezers.
  • Gently remove the blue tape near the camera using the tweezers.

Add Comment

Using the tweezers, remove the camera by grabbing the metal and pulling it out.
  • Using the tweezers, remove the camera by grabbing the metal and pulling it out.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 214