Open the phone so that the keypad and screen are facing up.
  • Open the phone so that the keypad and screen are facing up.

Add Comment

Use the blue plastic opening tool to pry off all four of the rubber stickers from the upper inside face.
  • Use the blue plastic opening tool to pry off all four of the rubber stickers from the upper inside face.

Add Comment

Use the Torx T5 screw driver head to remove the four 5.4 mm screws from the upper inner face.
  • Use the Torx T5 screw driver head to remove the four 5.4 mm screws from the upper inner face.

Add Comment

Once the screws and upper casing have been removed, locate where the camera attaches to the upper circuit board and detach it using a pair of tweezers.
  • Once the screws and upper casing have been removed, locate where the camera attaches to the upper circuit board and detach it using a pair of tweezers.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Will Edwards

Member since: 10/22/2012

61 Reputation

9 Guides authored

Team

Clemson, Team 14-1, Benson Fall 2012 Member of Clemson, Team 14-1, Benson Fall 2012

CLEM-BENSON-F12S14G1

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 318