Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

This guide will cover the steps on how to remove the back plate of a Motorola V60i.

Parts

No parts specified.

  1. Flip the phone over so the back cover is facing up. Using either a finger or a spudger, press the button located near the top of the phone by the antenna.
    • Flip the phone over so the back cover is facing up.

    • Using either a finger or a spudger, press the button located near the top of the phone by the antenna.

  2. Pry up the back plate from the phone. Push the button near the bottom of the battery using either your finger or the spudger to release the battery.
    • Pry up the back plate from the phone.

    • Push the button near the bottom of the battery using either your finger or the spudger to release the battery.

  3. Using a T6 Torx screwdriver, remove the four screws from the back of the phone.
    • Using a T6 Torx screwdriver, remove the four screws from the back of the phone.

  4. Simultaneously press the highlighted buttons on both sides of phone. Simultaneously press the highlighted buttons on both sides of phone.
    • Simultaneously press the highlighted buttons on both sides of phone.

  5. Separate the back plate from the rest of phone.
    • Separate the back plate from the rest of phone.

    • Do not pull the wire connecting the front and back plates.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Elizabeth OBrien

Member since: 04/26/2010

43 Reputation

7 Guides authored

Team

Cal Poly, Team 30-40, Garner Spring 2010 Member of Cal Poly, Team 30-40, Garner Spring 2010

CPSU-GARNER-S10S30G40

4 Members

14 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 9

All Time: 3,302