Introduction

How to replace a faulty antenna.

  1. Depress the silver button. Pull from top of phone to lift the cover.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

  2. Hold battery from both sides at the bottom. Push upwards and gently lift to remove.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Remove the four screws from the corners using a T-6 screwdriver.
    • Remove the four screws from the corners using a T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

  5. Use spudger to pry up back cover from the two side clips. NOTE: sticker might be attached to rest of phone.
    • Use spudger to pry up back cover from the two side clips.

    • NOTE: sticker might be attached to rest of phone.

  6. Flip over the back cover. Remove the plastic frame. Remove the plastic frame.
    • Flip over the back cover.

    • Remove the plastic frame.

  7. Lift up antenna. Lift up antenna.
    • Lift up antenna.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

Member since: 04/10/2010

1 Reputation

5 Guides authored

Team

Cal Poly, Team 25-86, Amido Spring 2010 Member of Cal Poly, Team 25-86, Amido Spring 2010

CPSU-AMIDO-S10S25G86

5 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,695