Motorola Razr V3c Battery (CDMA) Replacement

Replace the battery in you Motorola Razr V3c.

  • Author: krisko
  • Time estimate: 1 minute
  • Difficulty: Very easy

The purpose of this guide is to show how to install or replace a Motorola V3c battery.

Edit Step 1 Battery (CDMA)  ¶ 

Image 1/3: Lift and remove the rear panel away from the V3c.

Edit Step 1 Battery (CDMA)  ¶ 

  • Press down on the the rear panel release button while simultaneously prying the rear panel straight away from the V3c.

  • Lift and remove the rear panel away from the V3c.

Edit Step 2  ¶ 

Image 1/2:

Edit Step 2  ¶ 

  • Remove the battery by pushing in the top of the battery and lifting it away from the phone.


To reassemble your device, follow these instructions in reverse order.

Now that you've finished, share your repair story with others.

Write a story


Add a comment

With the phone closed, press the silver button shown with a fingernail or such. Tilt and lift the battery cover and put aside.

walltoall - Reply

The Motorola V3 battery has a notch in one corner to ensure it can only go in one way. Fit the replacement battery by offering its bottom edge to the device, then tilt and click using thumb pressure.

walltoall - Reply